What are the Hp printer's E1, E2, and E3 errors?

0 Votes

E1, E2, and E3 are the errors in the HP printers. These errors are common, and each has its own steps to do. But in general, errors on the HP Printer can be fixed by resetting the printer. After that, it will restore the machine based on its original settings. Printers are categorized into three parts: laser, ink, and dot-matrix. Now the time has changed. The printers are coming without the cable, but earlier printers face a lot of errors, such as E1, E2, and E3. 

How to fix E1, E2, and E3 Errors in HP printers?

Before going further, you must clean the cartridge printer after or before use. You can clean your printer once a week. You can go for the daily cleaning that should be done anytime quickly. The second is thorough cleaning, called deep cleaning, which will improve print results. You can do it once a month for the printers which are moderate in activity. If it still does not resolve the error in the HP printer, then you can follow the method mentioned below to fix the E1, E2, and E3 errors in your respective printer. 

Fix the E1 error in the HP printer. 

You can fix the e1 error in the HP printer by pressing the resume button or the cancel tab to cancel the print job and take out the paper to address mismatched paper size problems. Before printing, change the paper size setting, and you can remove all the paper from the input tray and load the paper that matches the paper size setting to be printed. 

Fix E2 error in HP printer. 

The printer receives a one-page print job that detects that the printer dimensions do not match the length of the paper loaded and prints the page with an error. This is called the E2 error. 
To fix this error, press any button on the control panel and then wait for two minutes. To address mismatched paper dimension problems, you need to change the paper size settings for the print job to fit the loaded paper. 

You can remove all the papers from the input tray and load paper that matches the paper size setting for the print job. 

Fix the E3 error in the HP printer. 

It occurs due to a jam inside the printer. First, open the print head access door and make sure the carriage is clear. You must move towards the printhead access door and press the resume button. 

How do I get my printer out of error? 

You must ensure the printer is turned on and connected to the PC by Wifi or cable. Now be sure there is no low paper or ink in the cartridge section. You can also check that the cover is not open and the paper is not jammed. 

How do I diagnose my HP printer problems? 

Open the HP smart app and select the diagnose and fix setting. Then click on Start and follow the instruction. 

If the issue still needs to be resolved, contact the HP customer service executive at toll-free 800-407-4005. 

Read Also:- Having an Issue with Your HP Printer: Fix & Solve It